Wednesday, October 5, 2011

Chip Foose: Ford F-150 Fx2

The Ford truck team sat down with hot rod celebrity Chip Foose last year at the Specialty Equipment Marketing Association (SEMA) convention in Las Vegas - the heart of the red-hot $34 billion auto aftermarket industry - and issued a daunting challenge: "We asked Chip Foose to design a tough, muscular street rod based on the Ford F-150 FX2 Sport pickup that will knock the socks off even the most hard-core boulevard cruiser fan," says Ben Poore, Ford Truck group marketing manager. "And let's make it available in less than a year before the 2007 SEMA show." Less than five months later, Ford and Foose are revealing the low-slung, production-intent Ford F-150 Foose Edition show truck, a precursor to the truck that will bow in the fall of 2007 as the most powerful and fastest half-ton production truck on the planet. But right at that table, the seven-time winner of "America's Most Beautiful Roadster Award" waved his wand - in his case a No. 2 pencil - and sketched out a conceptual offshoot of America's favorite pick-up that looked like a true boulevard cruiser with design elements that visually lower the truck.

Hot rod magic
It started where the Ford F-150 Foose Edition meets the road, the big 22-inch original wheels that fill the wheel wells with larger flares, causing the pickup to look lower. Foose also designed and fabricated a custom rocker panel that enhances the lowered look even though the truck was only slightly lowered. "How the vehicle sits and how the wheels are proportioned to the body is the first essence to give it the illusion of something lower than it is," says Foose. Wide, bold racing stripes further accentuate the planted stance. They start at the leading edge of the hood, helping to flatten it out. The striping thins out, stretches down over the front fenders, and runs the length of the vehicle above the door handles and across the tailgate for a streamlined look from the side. Then it widens again at the tailgate for an exclamation mark. Foose also has replaced the Ford F-150 FX2 Sport's dark billet grille and bumper opening with a new grille design with horizontal bars that makes the frame look shorter. Then, he has surrounded the design with lower rocker moldings that seemingly further drop the pickup.  The process was easier than it sounds, Foose says, because he had a great canvas - the Ford F-150 - to work with. It was also a labor of love. Chip Foose's personal primary ride is a souped-up 2005 Ford F-150 Lariat. Ford engineers then took over by first creating computer renderings of Foose's sketches. "Chip sketches on paper; he doesn't like to use computers," says Karen Gietzen-Stewart, business strategy manager, Ford Advanced Product Creation. The Ford truck team analyzed these renderings to ensure the Ford F-150's tough images was maintained. A concept truck was built and then, in early 2007, Foose flew to Detroit where he made final finishing adjustments to the design. Foose touches are carried into the interior, with Chip Foose signature headrests and floor mats. A unique, leather-wrapped center console features a Foose-designed serialization plate with vehicle identification number (VIN) and build-sequence numbers mounted on the ashtray door. To match its muscular look, the Ford F-150 Foose Edition is the most powerful and fastest half-ton truck on the market. The intercooled, supercharged Triton® V-8 pumps out 450 horsepower at 5,200 rpm and 500 pounds-foot of torque at 4,000 rpm. "The Ford F-150 Foose Edition is the fastest truck period," says Matt O'Leary, Ford F-150 chief engineer. "And it's the only performance vehicle to offer the flexibility of the pickup bed."

Ford F-150 leads huge customization industry

The Ford F-150 was named the "most accessory friendly pick-up" by SEMA, the trade group that keeps tabs on the aftermarket - an industry that has grown eight to 10 percent the past 10 years. Customers also prefer the Ford F-150 for personalization as they currently spend nearly $1,700 each to customize it - more than double the rate in 2004 and more than any other competitive truck. "The Ford F-150 lends itself to accenting because it's so recognizable as America's favorite pickup. It's already widely accepted because it comes in the most varieties and customers spend more on it than any other truck to personalize it even further," says Foose. "And it's clean, too. That's why I drive an F-150 - it's great looking, powerful and yet very minimalist in its design." Ford's overall customization business grew 50 percent in 2006, far outpacing all other automakers, and is expected to double by 2008. This growth has been driven by full factory-customized vehicles - such as the Harley-Davidson and FX2 Sport F-150 model - versus individual parts sales. "This is really a fashion industry," says SEMA's Peter MacGillivray. "Consumers want to put their personal stamps on everything they buy - from personalized rings to build-a-teddy-bear - and everybody knows that 'you are what you drive.' The Foose Edition is a fantastic collaboration between Chip Foose and Ford. "It's a vehicle that will be embraced by all kinds of buyers - not just the hard-core enthusiast who really knows the Ford F-150's heritage and Chip's track record, but also people who are just into cool cars and trucks. Couple that with Chip's celebrity and broad appeal - there are millions of excited consumers from his TV show - and I think Ford's got a real winner here." The Ford F-150 already offers the most models and configurations - five series and 60 major variations - of any half-ton truck. Ford also continues its long-time truck heritage of building specialized models to appeal to the growing number of niche customers. Poore says the F-150 has led the trend of pickups going mainstream. "Chip Foose is similarly reaching beyond traditional automotive audiences and will help Ford trucks reach an even broader audience with the 2008 Ford F-150 Foose Edition," says Poore. The 2008 Ford F-150 Foose Edition will begin life as an FX2 Sport model from the Kansas City Assembly Plant. The unique Foose elements will be customized at a modification center before being shipped to Ford dealers. The truck will go on sale by early 2008.

Hoffman's 1990 640 SS Chevorlet


Drive Train

638 CID All Aluminum Brodix Big Block
Dyno tuned to 825HP as in the truck
Brodix 11.1” Tall Deck Aluminum Block
Brodix Big Duke 1803 Aluminum heads
Titanium Connecting Rods
Callies crankshaft
ARP Studs and Fasteners
Hogan Custom Black Anodized Intake
Distributer-less TEC-GT EFI System
Vintage Air Black anodized Front Runner Pulley System
Stage 4 FLT Built 4L80e overdrive Electronically controlled Transmission
Yank 3200RPM Stall Lockup Converter.
Denny’s Nitrous Drive Shaft
Strange 1350 Series U-Joints
Locking 3.73 14 Bolt Differential
Variable Ratio Power Steering
Front Stabilizer Bar
Independent Front Suspension
Performance Handling Package
Completely Boxed Frame for Rigidity

Brakes

Disc/Drum Power Brake System
 Hi Performance slotted and vented front rotors fitted with hi-performance low dust, low fade pads
Pushed by a Hydraulic Brake Booster system and proper Master Cylinder
Rear Wheel Anti-Lock Brakes

Body

Completely Stripped and Restored 454SS Body
All Welded Cargo Box
Bed Tubbed to clear the 13” wide Mickey Thompson’s
Sport Appearance Package

Modern Amenities

Air Conditioning Updated and converted to R134
A/C Compressor is electronically controlled to disengage at High Engine RPM to prevent damage to A/C system.
Electronically Tuned AM/FM w/Stereo
Auxiliary Input for I-Pod
Cassette Clock and Graphic Equalizer
Power Windows and Locks
Electronic Speed Control
Comfortilt Steering Wheel
Intermittent Wipers
Auxiliary Lighting
Tinted Glass

Wednesday, September 28, 2011

Chevorlet ZR2 Concept

Inspired by Chevy’s highest performance vehicle, the Corvette ZR1, the Silverado ZR2 concept gets plenty of high performance options, like a supercharged LS motor and plenty of carbon fiber. Unveiled at the SEMA Show, this extended cab/short box truck also boasts a massive new front grille, carbon fiber fender flares, a four-inch suspension lift, a BDS shock set, 20-inch wheels and a set of 35-inch Goodyear Wrangler off-road tires.
Carbon fiber was also used for the hood, front fenders, rocker extensions and the tailgate, and is easily visible thanks to a clearcoat. Other body components are painted Dune Metallic, to help the trunk blend in when hopping sand dunes on the Baja Peninsula.


Under the hood there’s a GM Performance Parts Supercharged LS engine that produces 550-hp!
Rumored to be a possible precursor to a Ford F-150 Raptor competitor, the folks at Chevy aren’t talking, but Chevy brand VP Brent Dewar has said that some of the trucks components are being explored for use on future models.

Chevy Big Red -Dale Earnhart Jr.

LAS VEGAS – While he’s normally associated with the Chevy Monte Carlo SS racecar he drives on Sundays, Dale Earnhardt Jr. also is an enthusiastic truck aficionado – especially those trucks that perform best off the road. GM teamed up with Earnhardt to design and build the ultimate Silverado off-roader, dubbing it the Dale Earnhardt Jr. “Big Red” Silverado.

The Dale Earnhardt Jr. “Big Red” Silverado is based on the all-new, 2007 Chevy Silverado crew cab and features custom exterior appointments, an off-road-ready suspension, one-off custom 20-inch wheels at Dale Jr.’s request, a custom interior and more. This one-of-a-kind Silverado builds on Earnhardt’s personal notion of off-road enjoyment, which was previously conveyed in his personal truck – a previous-generation Silverado named “Big Red.”

“The ‘Big Red’ Silverado is the ultimate expression of off-road trucks,” said Ed Peper, Chevrolet general manager. “It is inspired by Dale Jr.’s personal and modified Silverado, but takes his concept to an entirely new and exciting level.”

Earnhardt collaborated with GM designers on the truck, visiting the GM Design studio in Warren , Mich. to discuss the exterior and interior enhancements, which include all-new front-end sheet metal and rear fenders, as well as a “flying bridge”-type roll bar with integrated off-road driving lamps. The interior is as luxurious as the exterior is off-road-capable, with rich, black leather upholstery and other details.

“This truck has Dale Jr.’s personality woven all through it,” said Peper. “It even has a locomotive horn that was his idea; when it blows, you know for miles around who’s coming up the trail.”

The Dale Earnhardt Jr. “Big Red” Silverado is powered by GM Powertrain’s 6.2L Gen IV V-8 engine, a high-output, all-aluminum engine with variable valve timing that produces 380 horsepower and 417 lb.-ft. of torque. It transfers its power to all four wheels via a Hydra-Matic four-speed electronically controlled transmission. The front and rear axles are equipped with 3.73 gears and Eaton ELocker electronic locking differentials, which help the truck deliver exhilarating performance with tall off-road tires. Stopping power is enhanced with a set of Baer disc brakes, including six-piston calipers and 15-inch cross-drilled rotors in the front and twin-piston floating calipers with 13-inch cross-drilled rotors in the rear.
Exterior flair
The commanding stance and flared bodywork of the “Big Red” Silverado combine for a menacing presence. All of the front end sheet metal, including the bumper, fenders, hood and grille are unique to the Dale Earnhardt Jr. Silverado, as are the rear fenders and rear bumper.

The front end design evokes the look of Baja racers, with a high-mounted, brush guard-type wraparound bumper, which conceals an integraed 6,000-pound Warn Winch. The brush guard bumper is fully integrated into the design and contours of the Silverado, extending out toward the flared front fenders. The large fender opening and box-type flares accommodate both the large off-road tires and the vertical travel of the front suspension. The hood also is custom and features a front-opening air intake scoop, which further adds to the truck’s powerful appearance.

Like the front fenders, the Dale Earnhardt Jr. “Big Red” Silverado’s rear fenders feature large openings and boxed flares. At the top of the rear fenders, a unique roll bar is enhanced with a flying bridge-style extension that incorporates housings for large off-road driving lamps. The flying bridge extension is integrated with the design of the Silverado’s cab and rear fenders.

At the rear is a custom roll pan, with four, large six-inch-diameter exhaust outlets exiting beneath the center of the truck. There is no tailgate, leaving open access to the cargo bed which, like off-road racing trucks, is equipped with mounted spare tire and wheel.

The “Dale Earnhardt Jr. Big Red” Silverado is painted with a unique base coat, mid-coat and clear coat system. The base coat is a custom mix with Spectra Flair additive; the mid-coat has a red tint hue. The Spectra Flair additive in the base coat combines with the mid-coat to provide a unique metallic appearance. The top clear coat application gives the paint finish a mile-deep shine. Subtle “Dale Jr.” signature and “8” graphics are found on various areas of the body and chassis.
Serious stance
The stance is achieved with a raised suspension and the large, off-road wheel/tire package. A Rancho four-inch lift kit, with adjustable front and rear shocks, is used, along with GM front coil springs and re-arched rear leaf springs. Off-road skid plates and other underbody shielding are employed to protect vital chassis and engine components when driving over rocks and other unseen obstacles.

Befitting this one-off off-roader, it wears unique, GM-designed 20 x 12-inch wheels. These CNC-machined wheels have a bold, deep-dish design. They feature 5.125-inch backspacing in the front and 3.375-inch backspacing in the rear, which helps push out the wheels to the edge of the vehicle, enhancing the rugged look of the “Big Red” Silverado while simultaneously providing increased off-road driving stability and a lower center of gravity.

The fenders have larger openings and are flared to accommodate large, off-road tires mounted on the GM-designed 20-inch deep-dish wheels.
Interior details
The Dale Earnhardt Jr. “Big Red” Silverado’s cabin is trimmed all in black, with Ebony leather-covered seats with Gloss Ebony leather piping. Black also is the color of the Providence headliner, carpet and trim plates, which have glossy, “piano black” appearance. Spectrum Cubic metallic soft-touch paint was applied to the door switch plates, instrument panel and control panel, providing a unique, high-tech appearance.

The interior simultaneously conveys luxury and an all-business attitude, owing to the truck’s off-road capability. It’s the perfect environment for a driver who’s at home in race vehicle, but seeks a more comfortable environment when relaxing – even if that means crawling over rocks, slogging through rivers and flying
over dry riverbeds.